device specifications

• MONITORING FEATURES:

  • Sump basin water level (Notifies when water level is critical and alerts when user-set level is reached)

  • Power failure

  • Drainage System performance (Impluvium calculates the drainage system performance to detect malfunctioning)

  • Pumping range consistency of main and backup pumps

  • Pump performance (Impluvium notifies the user if the pump may not be capable of maintaining a safe water level)

  • Backup pump's 12V battery charge functioning and charge level

  • Temperature, humidity and atmospheric pressure (user-defined warning levels)

  • Water Leaks 

​​

• MAINTENANCE REMINDER FEATURES:

  • Drains counter (Monitor number of drains performed by main pump and backup pump (if installed) and sends maintenance reminders at stages as set by the user according to the pump manufacturer's recommendations)

  • Inactivity alert (Sends reminder to test drainage system after a long period of inactivity to avoid surprises when pump is needed most)

  • Sump basin maintenance reminders

​​

• AUXILIARY INPUT/OUTPUT: 

  • 2 Dry Contact Inputs

  • 1 Water Leak Sensor Input (Sensor included)

  • 1 Analog Input 

  • 1 On/Off Output

  • 1 Two-way Output

​​

• AUTOMATION FEATURES: (User can trigger outputs and/or alerts based on a list of real-time data)           

  • Input Example:

    • Example 1: If IN1 is high, send an in-app notification and turn the AUX 1 ON

  • Output Examples

    • Example 1: When the basin level reaches 60%, turn the Aux 1 ON

    • Example 2: When the temperature is higher than 32°, send a mail notification and set the Aux 2 OFF​

​​

• CHARTS:

  • Sump basin water level, fill rate

  • Ambient environment (Temperature, humidity and pressure)

  • Up to 6-months of depth history

​​

• CALCULATED DATA:

  • Fill rate (amount of water flowing into sump basin)

  • Cycle frequency (interval between draining cycles)

​​

• MISC:​​

  • Wi-Fi 2.4GHz network support (Note: the 2.4GHz provides about twice the coverage as 5.0GHz)

  • Cloud-based service (99.9% uptime ---- TLS secure connection for hardware and app) 

  • Basic features and alerts available during temporary internet outages

  • Built-in 6V 4500mA rechargeable battery (Estimated battery life in standard conditions is 24+ hours)

  • Smart internal battery check feature: cyclically tests for the built-in rechargeable battery's performance (If replacement is necessary the user will be notified)

  • Dual-core microprocessor (One core dedicated to the pump(s) activity) 

  • Over-the-air (OTA) Firmware updates

  • Customizable Firmware by request (subject to minimum order quantity requirements and feasibility approval)